Hardware

PANEL3

PoE AES67 Source Selector

The PANEL3 is a PoE-powered wall-mounted AES67 source selector with a built-in AES67 module. Using just the knob and display, users can adjust volume, mute, switch among up to 4 network audio sources, and recall 10 DSP presets β€” all on-site, without a PC, with settings retained after power loss.

Contact Sales
PANEL3 product detail photo 1

Key Features

Built-in AES67 module

Built-in AES67 module for direct network audio I/O β€” no external conversion device required.

Cross-brand AoIP compatibility

Compatible with major AoIP ecosystems: direct interoperability with AES67, RAVENNA, ST 2110-30, and Q-SYS devices.

4 network sources

Up to 4 configurable network sources with one-touch output channel switching from the panel.

PC-free local control

Knob + display for PC-free local control of volume, source, and presets.

Fine volume steps

Fine per-channel volume adjustment: 5% steps below 80%, 1% steps at 80% and above.

One-touch mute

One-touch mute with red panel glow and "Mute" shown on the display.

10 DSP presets

Supports 10 DSP presets: Preset 1–10 user-defined.

PoE single-cable power

PoE single-cable power over one network cable β€” no external DC supply required.

Power-loss memory

Power-loss memory: channel, preset, and volume are automatically restored after reboot.

PC-Free On-Site Control

Rotate to adjust volume, short-press to mute, long-press 2 seconds to enter configuration mode (with a flashing panel indicator) β€” source switching or preset recall takes just seconds, with no control software needed.

DSP Preset Management + Power-Loss Memory

Supports Preset 0 (factory configuration) and Preset 1–10 (user-defined); the panel only shows presets that have been saved. Channel, preset, and volume settings are stored in the module, survive power loss, and are automatically restored on power-up.

Cross-Brand AoIP Connectivity

The built-in AES67 module receives network audio streams directly from AES67, RAVENNA, ST 2110-30, and Q-SYS devices, eliminating protocol-conversion gateways and reducing compatibility risks when expanding or mixing equipment.

PANEL3 cross-brand AoIP connectivity diagram